DX Engineering Hot Rodz DXE-HR-2P Page 8 Quick Start Manual Download

Page: 8 / 8

- 7 -

SYN-DBR-125-100 - 1/8 in. Diameter, Dbl-Braid Dacron/Polyester Rope, 100 ft. Roll

Synthetic Textile Industries Double-braided Dacron/Polyester ropes are not weakened by decay or
mildew and provide excellent resistance to abrasion. The color sealed black polyester yarn used in the
braided jacket also protects the cord from damage due to ultra-violet light.



100' spool - 1/8'' diameter rope - Double-braided Dacron/Polyester rope - Excellent resistance to
abrasion - NOT weakened by decay or mildew - UV-Resistant - Rated for a load of 420 lbs

JTL-12555 - Jet Lube SS-30 Anti-Seize, .25 lb plastic jar

Jet-Lube SS-30 Pure Copper Anti-Seize is designed for use on taps, lugs, wiping contacts, drum switches,
slip rings, and more. An environmentally preferred thread lubricant and conductive termination compound,
Jet-Lube SS-30 helps keep your equipment in serviceable condition. It contains a high concentration of
copper flakes, a requirement for heavy loads or compression; controlled frictional characteristics allow the
surfaces of nuts and bolts to be tightened to their design torque specifications. This anti-seize product
assures full hydraulic efficiency by allowing the metal

surfaces to slide over each other without damaging

metal-to-metal contact.

This part is classified hazardous and is limited to domestic UPS Ground shipping only

Technical Support

If you have questions about this product, or if you experience difficulties during the installation, contact DX Engineering at (330)
572-3200. You can also e-mail us at:

[email protected]

For best service, please take a few minutes to review this manual before you call.

Warranty

All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from
date of shipment. DX Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item or part thereof which is
proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or
any other work, unless such charges  are authorized  in  advance by DX  Engineering.  If DX Engineering’s products  are claimed to  be defective in
material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-
charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing. The above
warranties  shall  not  extend  to  any  products  or  parts  thereof  which  have  been  subjected  to  any  misuse  or  neglect,  damaged  by  accident,  rendered
defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged
exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts
thereof  furnished  by  Buyer  or  acquired  from  others  at  Buyer’s  specifications.  In  addition,  DX  Engineering’s  warranties  do  not  extend  to  other
equipment and parts manufactured by others except to the extent of the original manufacturer’s warranty to DX Engineering.  The obligations under
the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies
including  claims  for  special  or  consequential  damages.  SELLER  NEITHER  MAKES  NOR  ASSUMES  ANY  OTHER  WARRANTY
WHATSOEVER,  WHETHER  EXPRESS,  STATUTORY,  OR  IMPLIED,  INCLUDING  WARRANTIES  OF  MERCHANTABILITY  AND
FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY
IN ACCORDANCE WITH THE FOREGOING.

©DX Engineering 2019

DX Engineering