- 4 -
Selecting the Frequency
The rods can be adjusted to nearly any frequency with a few simple adjustments. Follow the
directions below to fine-tune your system to the desired frequency.
Lowering the Frequency
To lower the frequency of a Hot Rodz® equipped antenna, do the following until you achieve the
desired results:
1.
Move the rods out from the center to form a larger capacity hat.
2.
Add more stainless steel rods (6 maximum).
3.
Use longer rods.
4.
Add a whip.
5.
Extend an existing whip further in length.
Increasing the Frequency
To raise the frequency of a Hot Rodz® equipped antenna, do the following until you achieve the
desired results:
1.
Move the rods in toward the center to form a smaller capacity hat.
2.
Add fewer stainless steel rods.
3.
Use shorter rods.
4.
Remove an existing whip.
5.
Retract an existing whip (less length).
