Using the DXE-UT-808X
A. Cut the end of the coaxial cable with the
CNL- 911
Coax Cable Cutter to
get a good flush cut.
B. Install the PL-259 shell and the Reducer on the coaxial cable and slide them out of the
way. Place the prepared coaxial cable end into the body of the
DXE-UT-808X
labeled "
1st CUT
".
C. Firmly grip the coaxial cable and the
DXE-UT-808X
, turn the
DXE-UT-808X
in a clock wise
direction while applying steady and slightly firm pressure. Grip the coaxial cable between your
thumb and first finger, close to the tool.
D. As you turn the tool clockwise, the
DXE-UT-808X
will begin cutting the outer
insulation. Keep turning the tool in a clockwise direction until it will not cut
anymore, the tool will eject the cut outer insulation and stop cutting at the proper
length.
E. Remove the coaxial cable from the
DXE-UT-808X
. Fold the shield back over the
outer insulation.
F. Turn the
DXE-UT-808X
around for the second cut. Insert the coaxial cable into the
DXE-UT-808X
tool.
G. Firmly grip the cable between your thumb and first finger close to the
tool and turn the tool in a clock wise direction while applying steady
and slightly firm pressure. The
DXE-UT-808X
will begin cutting as
you turn it. Keep turning the tool in a clockwise direction while
applying steady and slightly firm pressure until it will not cut anymore, the tool will eject the cut insulation and stop cutting at
the proper length.
H. Slide the reducer up the coax to the end
of the cut off outer insulation. Fold back
the shield over the reducer as shown.
Using the
DXE-170M
precision shear
side cutters, trim the shield even with the first thread on the reducer as show.
I.
The PL-259 is now ready for installation. Gently screw the PL-259 on the
reducer ensuring the center conductors go into the center conductor of the PL-
259. The assembly is now ready to be soldered. This combination of DXE
tools allows perfect and easy connector installation every time!
----------------------------------------------------------------------------------------------------------------
