- 7 -
A 2.1 mm power cord is supplied with unit. The wire with the white stripes is the +12 Vdc.
Outer Connection
is
GROUND
Center Pin
is
+12 VDC
.
Figure 4 - Connections between the RCA8C-1 and the modified CC-8A
The
RCA8C-1
uses a removable five terminal plug as shown in
Figure 5
. The
RCA8C-1
connections are labeled “
G A B C D
”. The terminals use the same connection letters and are
connected G to G, A to A, B to B, C to C and D to D.
On the
RCA8C-1
the green connector is a two part connector as shown in
Figure 5
and the top part
can be removed by pulling it straight off. This will allow easier wire replacement or servicing as
needed. When pushing the removable connector back in place, ensure you press straight inward to
fully seat the connection.
Figure 5 - RCA8C-1 Green Connector
Summary of Contents for DXE-RCA8C-SYS-4P
Page 31: ... 31 NOTES ...
