- 5 -
Elements 1, 2 and 5, 6 are selected as the default for a forward direction of North-East for North
America, with elements installed as shown. A mirror image of this element positioning would be a
typical default North-West for European installations.
Figure 1 - Typical Diagram of the DXE-RCA8C-SYS-3P Receive Eight Circle Array System
System Overview
The heart of the
DXE-RCA8C-SYS-4P
system is comprised of the modified
DXE-CC-8A
Eight
Position Control Console, the
DXE-RCA8C-1
Receive Eight Circle Array Controller, eight
DXE-
AVA2
Active Matching Units for your vertical elements and one Delay Cable with F-Connectors
installed. These units interconnect and work together using factory default settings to control the
Receive Eight Circle Array. The modified
CC-8A
control console uses BCD switching voltages for
the
RCA8C-1
to change the receiving direction of the array.
When the modified
CC-8A
Eight Circle Control Console and the
RCA8C-1
Receive Eight Circle
Array Controller are connected as shown in the installation section below and the layout is as
described for North America in
Figure 1
, the switch positions on the modified
CC-8A
will switch
the array in the eight directions as shown in
Figure 2
.
Figure 2
Summary of Contents for DXE-RCA8C-SYS-4P
Page 31: ... 31 NOTES ...
