- 13 -
Mounting the BALUN to the top of the Mast
Loosen the band clamps on the Balun Mounting Bracket and install the bracket to the top mast
section as shown. The top element clamp will be even with the bottom of the previously installed
vinyl cap. Tighten the two clamps in place.
Attaching the End Insulators to the Guy Ropes
Using the supplied 100 foot roll of rope, cut four pieces of rope 25 feet each. Attach each guy rope
to one of the glass insulators.
One suggestion for attaching the guy rope is using a non-slip knot shown below. The ends of the
guy rope should be cauterized with a small flame to prevent the rope braid from fraying.
