- 8 -
Mount the
AVA-2
matching unit with the
ANT +
terminal toward the top up. Use the 5/8" bolts, a
flat washer under each bolt and a flat and split washer under each nut. Refer to
Figure 2
.
Figure 2
Loosely install the two stainless steel V-Clamps on the black mounting plate as shown in
Figure 3
.
Figure 3
Upper Clamp
Lower Clamp
NOTE:
The following describes the use of the
DXE-SSVC-1P
and
DXE-SSVC-1PG
V-Clamps
that are included with the
ARAV3
. These are used for mounting the
ARAV3
on a typical
ground rod from 1/2" OD to 3/4" OD.
If you plan to mount the
ARAV3
to a larger mounting mast, you will need two optional
DXE-SSVC-150P
and one optional
DXE-SSVC-150PG
V-Clamps which will
accommodate a mounting pipe that is 1" OD to 1-1/2" OD. Refer to
Figure 10
for
examples.
