- 6 -
DXE-AOKC-17M
Assembled
Parts
Drawing
Required Tools and Parts - Not Included
5/16” and 3/8” Nut Driver
Flat Blade Screwdriver
Pliers
Jet Lube SS-30 Pure Copper Anti-Seize JTL-12555
Jet-Lube SS-30 Pure Copper Anti-Seize is the choice of engineers and technicians in government, industry and leading
Amateur Radio contest stations, for protecting mechanical assemblies of aluminum tubing, general hardware and copper
grounding systems. On bonded metal surfaces Jet-Lube SS-30 assures electrical and RF conductivity while preventing
oxidation and corrosion. Surpassing the capabilities of other aluminum anti-oxidants, the wide temperature range of Jet-
Lube SS-30 prevents long-term drying and caking, and allows easy disassembly and effortless cleaning of parts.
Suggested Parts - Not Included
Ruggedized BTV Reinforced Lower Tube DXE-RLT
Build or refurbish any Hustler BTV antenna to be stronger with a DX Engineering Ruggedized BTV Reinforced Lower
Tube. The DXE-RLT double-wall aluminum tube is stronger than the original single-wall tube, and it works on all BTV
Series antennas, new and old. It is overall 72 in. so it is direct replacement; it takes the place of the original Hustler BTV
antenna 72 in. lower tube (HSR-4087-1).
OMNI-
TILT
™
Vertical Antenna Tilt Base DXE-OMNITILT-1P
Due to the design of the 17 meter and 12 meter add-on-kits for the BTV series antennas, the OMNI-
TILT
TM
Base is
desired rather than the DXE-TB-3P style Tilt Base. If the DXE-TB-3P is used, the clamps holding the lower bracket
assembly must be removed to allow the tilting action to be performed. The DX Engineering OMNI-
TILT™
Vertical
Antenna Tilt Bases are a completely new design that incorporates features that make this Tilt Base a 'must have' for all
types of vertical antennas. NOTE: The OMNI-
TILT
™ REQUIRES two (2) optional DXE-OTMC-250P clamps to attach
the non-tilt part of OMNI-
TILT™
to a Mounting Pipe, 1-1/4 to 2-1/2 inches OD.
