- 13 -
8. Locate two 3” cast saddle blocks, two stainless steel 3” x 3/8” x 5.25” U-Bolts, four stainless
steel 3/8" flat washers, four stainless steel 3/8" split lock washers and four stainless steel 3/8-16
hex head nuts. (Note: The U-Bolts and their hardware may be packaged separately). Loosely
assemble (one or two threads beyond the end of the hex nuts) the two U-Bolts to the Pivot Base
Winch Mount as shown below. The U-Bolts will be tightened in a later assembly step.
9. Locate four 3/8-16 x 1-3/8" long stainless steel hex bolts, eight stainless steel 3/8" flat washers,
four stainless steel 3/8" split lock washers and four stainless steel 3/8-16 hex nuts. Mount the
Pivot Base Winch Mount assembly to the stainless steel Pivot Base Locking Plate. Snug the
bolts, they don’t have to be real tight at this time. Note: These four bolts are removed when
using the pivoting function as described later in this manual.
