background image

- 16 - 

DXE-P8A  -  Penetrox A Anti-Oxidant - 8 oz Squeeze Bottle

 

Use Penetrox A electrical joint compound to affect a substantial electrical connection between metal parts such 
as telescoping aluminum tubing or other antenna pieces. Ensures high conductivity at all voltage levels by 
displacing moisture and preventing corrosion or oxidation. For Aluminum to Aluminum, Aluminum to 
Copper, or bare conductors. Not recommended for use with rubber or polyethylene insulated wire.  

 

8 oz. squeeze bottle 

* This product is limited to domestic UPS Ground shipping only

 

 

 

DXE-RADW  - 500K or 1000K  Radial Wire Kits and Components

 

To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk 
radial wire kits use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is 
commonly available at the big box stores. It will last much longer in contact with soil than bare wire. 
The DXE-RADW- 500K or 1000K kit provide everything you will need to build the perfect radial system!  

 

500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation  

 

20/40 lugs  

 

100/200 radial wire anchor pins-  Eliminating the need to bury your radials!  

 

Build up to 20/40 radials, 25 feet long 

 

DXE-RADW-500K 

Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Staples 

DXE-RADW-1000K 

Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Staples 

 

 
 

DXE-RADW-500KBD or 1000KBD - Bulk Radial Wire Kits and Components 

To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial wire 
kit use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is commonly available at 
the big box stores. It will last much longer in contact with soil than bare wire.  The biodegradable anchors allow easy 
installation of radial wires, and will degrade and disappear in a year or so when they are no longer needed.  
The 

DXE-RADW-500

 or 

1000KBD

 kits provide everything you will need to build the perfect radial system!  

 

500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation  

 

20/40 lugs  

 

100/200 biodegradable radial wire anchor pins- Eliminating the need to bury your radials!  

 

Build up to 20/40 radials, 25 feet long 

 

DXE-RADW-500KBD 

Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Biodegradable Staples 

DXE-RADW-1000KBD 

Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Biodegradable Staples 

 
 

 
DXE-RADW-20RT/-32RT/-65RT Pre-Assembled, Radial Wire, w/ 1/4" ring Terminals, 20 Pack

 

The DXE-RADW Radial Wire Kits include the highest quality 14 gauge stranded copper wire with a relaxed black PVC insulation 
for easy installation of your radial system.  They allow fast and easy installation of your radial ground system, and permit you to mix 
and match different length to fit the available space. The stranded wire and relaxed insulation mean that the wire will lay flat as you 
place it on the ground - easy to install! The twenty pre-cut radial wires include 1/4" ring terminals professionally crimped on one end 
for quick and easy attachment to the radial plate.  These Radial Wire Kits are designed for users of vertical antenna systems which 
have the need for a high quality radial system for optimum antenna performance. The 1/4" ring terminals are machine crimped for 
maximum grip.  Soldering is not required for strength, but is recommended if installed in corrosive environments such as salt spray. 

 

Packed 20 Radial Wires per package 

 

14 gage, stranded copper wire  

 

Black relaxed PVC insulation 

 

1/4" Ring Terminal professionally crimped on each Radial Wire 

 

3 lengths to choose from: 20 Ft (-20RT), 32 Ft (-32RT), 65 Ft (-65RT)  
 

 
 
 
 

 

DXE-RADW-20RT 

Package of 20 each 20 Ft Radials with 1/4" Ring Terminals 

DXE-RADW-32RT 

Package of 20 each 32 Ft Radials with 1/4" Ring Terminals 

DXE-RADW-65RT 

Package of 20 each 65 Ft Radials with 1/4" Ring Terminals 

Summary of Contents for DXE-30VE-1





















Reviews: