Dwarf Connection X.LiNK-XS3, User Manual

Page: 9 / 20

Scope of Delivery
1x Receiver
1x Multidirectional NPF Battery Plate
1x Spacer for NPF Battery Plate
1x Mounting Piece for NPF Battery Plate
1x Power Cable 4pin to D-Tap
4x M3x6 socket head screws
4x M3x25 flat head screws
Quick Start Guide
Assembly Guide
USB flash drive with product manual
Operation
1. Use the enclosed D-Tap cables or a NPF battery to power your receiver.
Only use 4-pin cables provided by DwarfConnection to power your DC-LINK
system! Other cables might cause damage of your products!
2. Turn on your devices.
3. Make sure transmitter and receiver are set to the same channel.
Switch channels if necessary. (Find detailed instructions in “Features”)
Signal Distribution
Connect the receiver’s SDI or HDMI output to the SDI or HDMI input of the
monitoring/recording device.
Only use high quality 7,2 - 18,0V batteries.
9
EN