Dwarf Connection DC-LINK-MR1PRO, Manual

Page: 8 / 48

8
Operation
Transmitter
1. Connect the five omni-directional antennas to the transmitter's RP-SMA male
connectors.
2. There are 5 ¼" 20mm tripod mounts at the base of the transmitter for stable
installation.
3. Connect the enclosed 12V/1A power supply to the DC-IN socket.
4. Connect the HDMI output of your video source (camera, PC etc.) to the HDMI
input of the transmitter.
5. If required, connect the RS232 connector of your source (remote control, PC,
PTZ-camera etc.) to the interface on the transmitter.
6. To ensure compliance with local regulations (see page 11 for more details),
please ensure you select the appropriate frequency or the DFS mode.
Receiver
1. Connect the five omni-directional antennas to the receiver's RP-SMA male
connectors.
2. There are 5 ¼" 20mm tripod mounts at the base of the transmitter for stable
installation.
3. Connect the enclosed 12V/1A power supply to the DC-IN socket.
4. Connect the HDMI output of the receiver to the HDMI input of the display or
recording device.
5. If required, connect the RS232 interface of the receiver to the connector on the
end device (video projector, control panel etc.).
6. Set the receiver to the same frequency as the transmitter.
7. If the transmitter and receiver are not connected in DFS mode, please follow
the instructions on page 14.