Dwarf Connection DC-LINK-MR1PRO, Manual

Page: 15 / 48

15
Operating Instructions ENGLISH
Confirm that you wish to remove the particular transmitter with the "OK" button.
Press "OK" again to begin the process.
The transmitter's pairing information is now removed from the list.
"Status"
Displays status information about the radio connection.
"Disconnect Wireless Link"
This indicates that the link between transmitter and receiver has been interrupted.
„Select Uart Baud“
Press the "OK" button to set the baud rate for the RS232 data transmission in the
submenu.
Using the "CH" button, choose between 4800, 9600, 19200, 57600 and 115200 Bd.
Confirm selection with "OK" button.