DW x39, User Manual, Page: 46 / 56

OSD -
CAMERA SETUP > AE SETUP
46
>
Press
Near/Enter
Key
>
Select ‘BACKLIGHT>BLC’,
Press Near/Enter Key
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
DAY/NIGHT
MOTION
SHUTTER SPD
SENS-UP
BACK
EXIT
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
- IRIS LEVEL
- BACKLIGHT
BACK
EXIT
< ALC >
< AUTO >
F.FAST
- - -
AUTOx4
< ALC >
0
OFF
< ALC >
0
BLC
CENTER
>
Select ‘AREA>USER’,
Press Near/Enter Key
>
Move Camera to BLC Area,
Press Near/Enter Key
AE SETUP
IRIS
See bellow AE SETUP - IRIS > ALC.
DAY/NIGHT
Color filter or B/W filter can be selected. If DAY/NIGHT is set to <AUTO>,
the DAY/NIGHT editing screen will appear. See the next page
DAY/NIGHT.
This is changed to AGC or MOTION according to the SENS-UP
setting.
AGC
Enhances the brightness of the image by amplifying gain when the
illumination is low.
MOTION
If MOTION is set as S.SLOW, the shutter speed will be slower to
obtain more light. There will be less noise, but this can cuase the
ghost effect of the moving object.
If MOTION is set as F.FAST, there will be more noise, but this will
reduct the ghost effect for any moving objects.
SHUTTER SPD
If this speed is faster, the moving object can be photographed
without the ghost effect. However, the images can be dark if the
scene lacks sufficient lighting.
If SENS-UP is set to AUTO, SHUTTER SPD is deactivated.
SENS-UP
Activates the slow shutter function when the liminance of image is
too dark for the CCD to accumulate the amount of light it is set to
obtain.
IRIS LEVEL
BACKLIGHT
This function improves the backlight effect, which is when the
subject is dark on the monitor because the intensive backlight.
- BLC:
You can select the desired area you wish to brighten. If it
is set on a bright area, note that the area will appear even brighter.
- WDR:
See AE SETUP - IRIS > ALC > BACKLIGHT > WDR on the next
page.
AREA
If set to USER, the user can set the specific area.
See screen on this page.
ALC / MANUAL
DAY / NIGHT / AUTO
VERY LOW / LOW / MIDDLE / HIGH /
VERY HIGH / USER 1~16 / FIX 1~16
S.SLOW / SLOW / NORMAL / FAST / F.FAST
OFF / 1/100 ~ 1/10K
OFF / AUTO x2 ~ AUTO x256 /
FIX x2 ~ FIX x256
-32 ~ +32
OFF / BLC / WDR
TOP / BOTTOM / LEFT / RIGHT / USER
1
AE SETUP - IRIS>ALC
If ALC is selected, the iris will be controlled automatically.
2
BLC AREA
3
BLC AREA
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
- IRIS LEVEL
- BACKLIGHT
- AREA
BACK
EXIT
BLC AREA
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[ENTER : SELECT]
BLC AREA
- - - - - - - - - - - - - - - - - - - - - - - - - - -
[ ADJUST MASK WIDTH]
[ ADJUST MASK HEIGTH]
[ENTER : SELECT]
5
1
2
4
3
2
2
2
4 5