OSD -
FUNCTION SETUP > PATTERN SETUP
40
PATTERN SETUP
Pattern function is when a camera memorizes the path (mostly
curve path) created by a joystick controller and revives the
path exactly as it memorized for an assigned time.
4 patterns are available and maximum 1000 communication
commands can be stored in a pattern.
2
1
2
1
3
2
3
PATTERN NO.
Select pattern number to edit. If a selected pattern number is not
defined, “UNDEFINED” will be displayed under the selected pattern
number.
CLEAR PATTERN
Deletes data in the current pattern.
<EDIT PATTERN>
Starts editing pattern.
1 ~ 4
CANCEL / OK
EDIT PATTERN - Selects the Position
1. By using joystick, move to the start position with appropriate
zoom.
2. To start the pattern recording, press Near or Enter key.
3. To exit this menu, press Far key.
EDIT PATTERN - Recording
1. Move the camera with joystick controller or run preset
function to memorize the path (mostly curve path) in a
selected pattern.
2. The total memory size and the rest memory size is displayed
in the form of bar.
3. To save data and exit, press Near key.
4. To cancel recording and delete the recorded data, press Far
key.
EDIT PATTERN 1
[NEAR:SAVE / FAR:DELETE]
0/0/x1/E
EDIT PATTERN 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO START POSITION
[NEAR:START/ FAR:CANCEL]
0/0/x1/E
EDIT PATTERN 1
[NEAR:SAVE / FAR:DELETE]
0/0/x1/E
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<
PRESET SETUP
>
<
SCAN SETUP
>
<
PATTERN SETUP
>
<
GROUP SETUP
>
<
SCHEDULE SETUP
>
BACK
EXIT
PATTERN SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PATTERN NO.
CLEAR PATTERN
<
EDIT PATTERN
>
BACK
EXIT
1
UNDEFINED
CANCEL
>
>
>
>
Select <EDIT PATTERN>,
Press Near/Enter Key
Press
Near/Enter
Key
Move Camera to Area,
Press Near/Enter Key
Record the Path of the Pattern
by Camera Control
4