18
8.
Repeat steps 2 through 6 for each desired position. Each title will be displayed on
top of the line.
9.
To edit the “TITLE”, follow the procedure of the Auto Scan above to edit titles.
10.
Select “SAVE AND EXIT” and press the Right or IRIS Open key. Press the IRIS
Close key to exit the program without saving.
You can expand the Tour sequence by calling other programmed Tours.
NOTE: The speed applies in vector mode only.
NOTE: In Tour mode, you can make the camera travel from a Preset position to
another Preset position at a specific speed.
Example: Preset 001>002>003>004>005>006, Auto Scan 01 starts at Preset
002, ends at Preset 003, Auto Scan 02 starts at Preset 005, ends at Preset 006;
Tour 001, 002, A01, 004, A02.
1
2 2~3
4
5~6, repeat where
: Quick move, ~ : Programmed speed
To assign functions other than a Preset in the Tour when the function key does
not exist:
1.
Move the cursor to a stored Preset position.
2.
Pressing the IRIS Open key will change the Preset number to other functions
(Auto Scan, Pattern, Tour, or Preset) with the first programmed number.
3.
To change the number, press the Tele or Wide key.