D H C P
The Dynamic Host Configuration Protocol (DHCP) is a network configuration protocol that allows a
device to configure automatically according to the network it is connected to.
If your network supports DHCP and your MEGApix camera is set to DHCP, IP Finder will
automatically find and set your MEGApix camera to correspond with your network requirements.
S t a t i c
Static IP addresses are recommended when using a network that does not support DHCP or when
setting your device to be accessed externally via the internet. If Static is selected, you must
manually enter the correct network settings for your MEGApix camera. The settings will
correspond with your network. To set your camera to a static IP address, we recommend that you
(1) setup the camera to DHCP, (2) allow it to configure itself according to your network, and (3)
change the settings to a static IP address.
1.
To set your MEGApix camera to Static, highlight the desired device from the search results
list, and click on
Configuration
. In the “Network Configuration” window, make sure
Static
is
selected.
2.
Enter the following information:
IP Address
,
Net-mask
,
Gateway
, and
Preferred DNS
.
3.
Click
Apply
and
Reboot
to save all changes.
D D N S
Dynamic Domain Name Server is a feature that allows you to use a specific URL instead of an IP
address to access your MEGApix camera. This feature is optional. It may require a subscription
and fee.
1.
To use the DDNS feature, check the box next to
Use DDNS
.
2.
Select the server you wish to use. *Some servers may require a subscription and fee.
3.
If applicable, enter the
User ID
and
Password
.
4.
Click
Apply
and
Reboot
to save all changes.
IP FINDER SOFTWARE*
1 3
Summary of Contents for MEGApix DWC-MB721M4TIR
