Network Setup -
Setup Case C, D
Configure your IP Camera’s TCP/IP properties
as follows :
1.
Network Type : STATIC
2.
Internet Address :
A static IP address received from your ISP such
as 24.107.88.125 (Example)
Configure your IP Camera’s TCP/IP properties
as follows :
3.
Subnet Mask :
Subnet mask assigned from your ISP such as
255.255.255.240 (Example)
1.
Network Type :
2.
DDNS Server :
DYNAMIC
Use the DDNS server
4.
Default Gateway : 24.107.88.113 (Example)
5.
Preferred DNS Server :
Use the 1st DNS Server from ‘Assigned IP
Address from My ISP’
3. Web Port : 80
6.
DDNS Server : Use the DDNS server
7.
Web Port : 80
Use the assigned default gateway from your ISP
If you have not received any IP addresses from your ISP, contact
them to acquire the IP address of their DNS server.
Case C:
Static(Fixed) IP [Dedicated line directly
to the IP Camera]
Camera
Phone Line
or CATV
Cable/xDSL Modem
(ISP Provided)
Internet
This is the same site you will register later to utilize our DDNS
service.
You may select any number between 1025 ~ 60000.
Case D:
Dynamic IP + DSL/Cable Modem [Connected
directly to the IP Camera]
Camera
Public Line
Gateway or
Router at ISP
Internet
To connect the IP Camera directly to a modem, power down
and reset the modem. Leave the modem powered down until
configurations are finalized with the IP Camera and the IP]
Camera has been connected correctly to the modem. Then
power on the modem, followed by the IP Camera.
You may select any number between 1025 ~ 60000.
This is the same site you will register later to accommodate
dynamic IP from your ISP.
You need to assign an IP address to the IP Camera just as you do
with PC.
65
