Installation and Mounting
13
Attach the back cover to the camera using two #6 screws and two
master seal washers, placing the metal side against the head of the
screw and gasket side against the camera body.
Figure 16: Back Cover Screws and Sealing Washer
Tighten the two fasteners to approximately 10 in-lbs.
(1.23 newton meters) of torque.
Assemble the two rubber stem bumpers onto the two detents in the
concave surface of the solar shroud.
Figure 17: Solar Shroud and Stem Bumpers
Snap the solar shroud into the base mount.
3.8.
Mounting the Camera
The camera can be mounted on a tripod or on a base mount or four-hole
bracket.
For tripod mounting, use the tripod adapter, which is available as an
accessory.
For base mounting, install the camera base mount on a standard flat
side bracket (not provided) using #6 32 x 3/8” screws (not provided).
Summary of Contents for ioimage CT-5320F
Page 2: ...CT 5320F CT 5640F Fixed Thermal Camera QIG ii...
Page 22: ......