24
Video input settings
The 75 Ohm termination of the 7700 Series unit can be set here. If the video signal is to be looped through,
the termination must be set off. The default setting for the video input termination is
On
.
Video input termination:
To loop the video signal through choose
Off
.
Audio configuration
In addition to video data, the unit can also transmit audio signals. The transmission of audio takes place at the
same time as that of the video data and thus increases the size of the data stream. If you use the MPEG-4
format for video data, audio transmission can be activated separately here. In this case, the audio data stream
requires an additional bandwidth of about 80 kBit/s.
Warning!
Audio data is only saved when central recording is used. It is not saved when video is exported to an
MPEG-4 file via the web-interface.
Activate audio:
To transmit an audio stream together with the MPEG-4 video choose
On
.
Alarm sources
You can configure the alarm triggers for the 7700 Series unit in this section (e.g. the alarm inputs).
Video loss alarm:
Select
On
if the unit is to activate an alarm whenever the video signal is interrupted.
Summary of Contents for 7701DA
Page 1: ...7700 Series User Manual...