22
MPEG-4 Encoder configuration
The 7700 Series transmitter has two MPEG encoders that can be configured separately. This allows for the
transmission of two different video streams, which can be used for different applications (e.g. live viewing and
recording).
There are several pre-programmed profiles, optimized for different application scenarios, available for each
MPEG encoder. Individual settings in the profiles can be changed, and modified profiles can be saved under
a new name.
Warning!
The profiles include a number of parameters that interact with one another. Therefore it is generally best
to use the profiles as provided. The profiles should only be changed after you have familiarized yourself
with all the configuration options.
You can switch between the parameters of the two MPEG-4 encoders by clicking the associated tabs. The
choice of Video Viewer encoder is set in the
Video Viewer configuration
page (see page 34).
Note
The parameters as a group constitute a profile and are dependent on one another. If you enter a setting
outside the allowed range for a parameter, the nearest valid value will be substituted when the settings
are saved.
Name of first (second) encoder:
Enter a unique name for each encoder. The name of the encoder will also be shown on the
Video Viewer
configuration
page.
Parameter preset:
Eight pre-programmed profiles are available for each of the two MPEG-4 encoders. These are optimized for
different transmission modes:
•
high res. (4CIF)
for very high bandwidth connections, 704 × 576 pixel resolution
Summary of Contents for 7701DA
Page 1: ...7700 Series User Manual...
