
Seat Back Monitor
23
Installation and Connections
Installation Setp
1
2
Remove the headrest
Remove the headrest from the seat. (Figure 1)
Measure the diameter of headrest stanchion
If the diameter of headrest stanchion is less than
16.5mm, it will need to use headrest stanchion
washer. (Figure 2)
Headrest
Headrest
stanchion
Buckle
Stanchion washer
(1mm or 2mm)
(Figure 1)
(Figure 2)
Slide block linkage
3
Install the connecting rod
Let the headrest stanchion pass though the
slide block linknge. (Figure 3)
Headrest stanchion
Slide block linkage
(Figure 3)
Before remove the Electric Headrest, please
remove the electric sensor first.
CAUTION
16.5mm
4
Fix the connecting rod
After adjust and confirm the slide block linkage
location, please use the Allen Key to tighten the
screws. (Figure 4)
Konb
Screw
Allen key
(Figure 4)
Screw
Summary of Contents for TH102MS
Page 34: ...Seat Back Monitor 33...
Page 35: ...34 Rear Seat Entertainment...
Page 36: ...DVS MS 980916 v0924...