DVS 0750325295840, Assembly Instructions Manual

Page: 4 / 31

4
CL604300DE-NL-ENG-FR
V02-20
This construction is for use in areas with Snowlast Aria 1 = 0.65 KN per M2 = 65 KG per M2
In the case of heavy snowfall, when it is more than 25 cm, it should be removed as much as possible !
Think about your safety, do not walk on the Polycarbonate roofing sheets !!
Manual for the end user and the installer:
Dear customer,
Thank you for purchasing one of our verandas. This manual
provides all the necessary information to quickly become familiar
with the product. We kindly ask you to read this information
carefully before working with the product.
This manual is intended for the end user and installers.
We recommend that the assembly of this construction
be carried out by (at least) 2 persons.
The assembly of the product is described in 2 chapters:
1: Preparation for assembly (from page 6)
2: Assembly (from page 17)
This is the original manual, look after it!
Product Description:
The veranda may only be used to cover a terrace. Any use, other
than defined here, is seen as unintended use.
The manufacturer cannot be held responsible for any
(consequential) damage caused by unintended, improper or
unwise use.
Symbols used:
This symbol means that the product is not included and you
have to purchase it yourself.
This symbol means that you must use the supplied screw.
The type and number of screws are shown beneath the
image.
Mounting materials that are not included must be
purchased separately because each situation requires
different fixings and depends on the substrate or construction to
which it needs to be affixed. Always seek advice from a specialist
building supplier about what is required in your particular situation
and only use stainless steel fixings.
Environmental conditions:
This product is intended for outdoor use and may get wet.
Precautions and Safety Instructions:
Warning!
- If your veranda contains lighting or heating, the electrical
installation may only be carried out by a qualified installer.
- The end user is responsible for the correct installation and use of
the product. Improper assembly or improper use may cause
damage to, or a defect in, the product. The warranty is void if the
product and/or the electronic components are damaged
due to improper assembly or use.
- Observe local laws and regulations when assembling and/or using
the product.
Please note!
- All screws should be carefully tightened with a torque of 1.0 Nm.
Make sure you tighten the screws with caution, when screwing into
soft materials like aluminium, screws can easily get “stripped”.
- When unpacking, check that all parts are present and check all
components for possible damage.
- Contact your supplier if any parts are missing or damaged, if
possible, take photographs of any damaged packaging and parts.
Maintenance, environment and disposal:
- Clean the product when dirty or at least every 6 months to ensure
a longer product life.
The symbol on the material, the accessories or
packaging indicates that this product may not be treated as
household waste. Dispose of the device through a
collection point for recycling waste electrical equipment
within the EU and in other European countries that have separate
collection systems for used electrical and electronic equipment.
Properly disposing of the device helps you to prevent possible
environmental and public health hazards that would otherwise be
caused by improper handling of the waste device. Recycling
materials helps to conserve natural resources, so do not dispose of
your old electrical and electronic equipment through household
waste.
Open the packaging with caution !!!
Check for missing or damaged contents !!!
In the case of shipping damage, make photos and contact your dealer !!!
ENGLISH
Important information !
Read carefully !
Keep this information for further reference