manualshive.com logo in svg

DVRSystems 2U Series, User Manual, Page: 140 / 174

Share
Download
DVRSystems 2U Series User Manual Download Page 140

                                                                           

 

 

140

 

Figure 7-47  

Important  

The alarm output port should not be connected to high power load directly (It shall be less than 
1A) to avoid high current which may result in relay damage. Please use the co contactor to 
realize the connection between the alarm output port and the load. 
Please refer to the following sheet for detailed information.  

Parameter  

Function  

Alarm output 

There are six output channels (Multiple choices).   
Please note the displayed alarm output channel amount here may 
vary due to the different series. 

Activate 

Enable/disable alarm output device. After the Web activated the 
alarm, you need to cancel the channel and then click the 
activation button to cancel the alarm, or you need to cancel the 
alarm in the pop-up dialogue box in local-end. 

Refresh  

Search alarm output status.  

7.3.3.3 Record  

Record control interface is shown as in Figure 7-48. 

Summary of Contents for 2U Series















































































































































































Reviews:

No comments