36
of the alarm i.e. if you set it to record for
60secs the relay will be on for 60secs.
LEVEL
You can set how sensitive you want the
VMD to be i.e. HIGH, NORMAL or
LOW
AREA
It is possible to set areas of the camera
image up for VMD i.e. you may only
want the DVR to start recording when a
vehicle drives through a gateway. This is
set up by going into the SET sub menu.
The blue squares represent active VMD
areas; clear squares are when there is no
VMD active. You will see a pink square
that you can move across the screen using
the cursor keys; to toggle the squares
press the Fn key (the cursor square will
now be white). As you now move it
around it toggles the blue area to clear,
thus turning off VDM and vice a versa.
TIME 1
TIME 2
Set these for the hours you want VMD to
be active.
8.6.4
Admin setting
ADMIN SETTING
Summary of Contents for CCT723
Page 3: ...3 1 DVR365 Applications...
