HD/SD Digital Video Switcher DSC945. User’s Manual
PiP and TITLES
PIP Preset and PIP Program
.
There are four PIP keys. These are labeled Program and Preset. The
upper PIP1 and PIP2 keys relate to activating Picture In Picture
images on the Program outputs. The lower PIP1 and PIP2 keys relate
to activating Picture In Picture images on the Multi-view or Preview
outputs.
Assigning a video source input to a PIP:
Using the lower PIP1 or PIP2 buttons you can assign a selected video input to the chosen PIP
video layer.
1) First press and hold down the required PIP button on the lower row. The Preset row of input
sources will light.
2) While still holding down the PIP button, press to select the required input from the Preset
row.
3) The input will flash to confirm it is selected.
This selection will also be confirmed on the HDMI Multi-view, with a PiP1 or PiP2 label shown
next to the selected input image.
TITLES Preset and TITLES Program
.
There are two TITLES keys. These are labeled Program and Preset. The upper TITLES key
relate to activating Down Stream Keying on the Program
outputs. The lower TITLES key relate to activating Down Stream Keying on the Multi-view or
Preview outputs.
Assigning an input to a DSK channel for keying:
Using the lower TITLES button you can assign a selected video input to the DSK video layer.
1. First press and hold down the required TITLTS PVW button on the lower row. The Preset row
of input sources will light.
2. While still holding down the TITLES button, press to select the required input from the Preset
row.
3. The input will flash to confirm it is selected.
This selection will also be confirmed on the HDMI Multi-view, with a TITLES label shown next to
the selected input image.
Titling Mode
The DSC945 has two titling methods: Luma Key and a Channel selected in the OSD
menu.
Luma Key mode
. You can use any video sources (HD/SD SDI, CVBS,HDMI, Still Pictures ) to
replace the black parts of this image with the video from another source.
DVLab
9
