background image

-1-

 

!

   WARNING – Product Safety

1.  Do not dismantle the product housing or modify the printed circuit board 

module as this may result in electrical shock or burn.

2.  Do not attempt to service this product yourself as opening or removing the 

product housing may expose you to dangerous voltages or other hazards. 
Refer all servicing to qualified service personnel.

3.  Keep this product away from liquids. Spills into the product housing may 

result in fire, electrical shock, or equipment damage. If liquid spills into the 
housing, unplug the product immediately. Have the product checked by a 
qualified service engineer before using it again.

4.  Place the product in an even and stable location. If the product falls or is 

dropped, it may cause an injury and/or malfunction.

5.  Avoid exposing the product to extreme temperatures or to high humidity 

levels as this may result in damage to the product.

6.  Only use the supplied External AC Power Adapter, or a USB power source. 

Using other power adapters may cause this product to fail or cause a fire.

7.  Do not twist or exert excessive force on the ends of the optical cable as this 

can cause it to malfunction.  Take care to ensure that the fiber optic cable is 
not forced to bend tighter than its specified minimum bend radius. 

Product Liability

Every effort has been made to ensure that this product is free of defects.  DVIGear 
cannot be held liable for the use of this product or for any direct or indirect 
consequential damages arising from its use.  It is the responsibility of the users of 
this product to check that it is suitable for their requirements and that it is installed 
correctly.

All rights are reserved.  No parts of this manual may be reproduced or transmitted 
by any form or means electronic or mechanical, including photocopying, recording 
or by any information storage or retrieval system without the written consent of 
DVIGear.

DVIGear reserves the right to revise any of its hardware and software following its 
policy to modify and/or improve its products where necessary or desirable.  This 
statement does not affect the legal rights of the user in any way.  All third-party 
trademarks and copyrights are recognized. The DVIGear logo is a registered 
trademark of DVIGear, Inc.  All other trademarks are the property of their 
respective holders.

Summary of Contents for DVI-7330











Reviews: