14
DVDO-Xtend-TX100_V1.0 0
DVDO-Xtend-TX100 3 x 1 HDBT Wall-plate Transmitter
User Manual
DVDO
API Command Control
Users can control the device via sending API commands as well. Please refer
to the following steps.
1. Connect the HDBT OUT of the transmitter to HDBT IN of receiver, the
transmitter can be powered by receiver via Cat X cable.
2. Use the Micro USB-B to USB-A cable provided to connect the UPDATE
port of the transmitter and your PC USB port. Or connect a PC to RS232
port of the connected receiver. It is ready for sending API commands.
3. Open your PC Device manager, find out the port, here is COM 2 as
example.
4. Install serial tool to your local folder (Take “UartAssist” tool as an
example).
5. Open the tool and type the port number COM 2 and Baud Rate 115200.
