5
8.
Maneuver carrier into desired position and tighten all hardware. Ensure to tighten slide bracket bolts
to lock position. After ALL hardware it secure, mark hole at end of lower bottom bracket. Drill
½”
hole and secure with bolt and nut. (Drilled stability hole recommended for 35
”
or larger tires)
9.
To mount tire, insert threaded post into carrier from the exterior facing to the interior. Place tire
onto post and place cone facing wheel followed by round plate and T-handle. As you are tightening
the T-handle, place your foot on the wheel and press tire into bed as you tighten the carrier.