DV8 TCGL-02 Product Installation Manual Download Page 4

Page: 4 / 5

Using the provided hardware, mount the main carrier to the lower bottom bracket. Keep carrier
loose at this point.

Once carrier is loosely attached to the lower bottom bracket, attached the rail bracket to the carrier
and the two slide brackets.

Summary of Contents for TCGL-02

Page 1: ...TCGL 02 Jeep Gladiator JT In Bed Stand Up Tire Carrier ...

Page 2: ...e are any concerns NOTE This requires the use of the Jeep Trail Rail Management System 2 Depending on the side of the vehicle you intend to mount the TCGL 02 reference images below for the layout of the lower floor bracket 3 Bolt the two above brackets together using supplied M10 hardware Leave all hardware loose until the end Passenger Driver ...

Page 3: ...pplied hardware loosely thread lower bottom bracket into side of bed 5 Next install the two slide brackets into the rail You will need to use the large access hole in the front to fit the mounts into the rail Ensure you use supplied hardware as shown in the image These will be tightened later to keep slide mounts into place ...

Page 4: ... hardware mount the main carrier to the lower bottom bracket Keep carrier loose at this point 7 Once carrier is loosely attached to the lower bottom bracket attached the rail bracket to the carrier and the two slide brackets ...