INSTALLATION
MANUAL
855-680-9595
NEED HELP?
STEP
1
STEP
3
Begin by unpacking all items and
inspecting for missing pieces or
damage. If you have any concerns,
please contact the company the
product was purchased from.
On the front body mount, use a 15mm
socket to remove the two bolts just
outside of the main body mount bolt.
When bolt bolts are removed, and
small metal plate will become free.
Remove this plate and set off to the
side since it will not be reused.
STEP
2
Remove any factory sliders, steps,
or rock rails if equipped since they
cannot be used with our sliders.
Broncos with factory equipped
rock sliders will have brackets for
mounting on the underside of the
vehicle, these can remain on or be
removed with our sliders using a
13mm socket.