DV8 JK 4 Installation Manual Download Page 2

Page: 2 / 7

Lay out all cross bars and sides to prepare

for assembly. Using a 10mm wrench and #4

allen head, assemble cross bars and sides

with provided M6x14 hardware.

NOTE: The full length roof rack is pictured, how-

ever preparation and assembly of the rack is the

same.

STEP 2

STEP 1

INSTALLATION

MANUAL

NEED HELP?

855-680-9595

(42) M6x14mm Bolts
(80) M6 Flat Washers
(58) M6 Split Washer
(8) M6 Fender Washer
(8)M6x25 Bolts

(8) M6x20 Bolts
(46) M6 Nuts

HARDWARE

INCLUDED

Begin by unpacking all items and inspect-

ing for missing pieces or damage. If you

have any concerns, please contact the com-

pany the product was purchased from.

Summary of Contents for JK 4

Page 3: ...with a flathead screw driver pop off the rear window hinge covers NOTE These can be brittle and break Use extra caution when removing Once roof rack is assembled install side feet onto rack using a 10mm wrench and 4 allen head with M6x14 hardware NOTE Do not tighten feet until rack is on Jeep to allow for adjustment STEP 5 STEP 4 STEP 3 INSTALLATION MANUAL NEED HELP 855 680 9595 ...

Page 4: ...ds the rear of the vehicle so the rack is resting against the rear hinge mount Assemble the rear rack brackets as shown in the image These will use the M6x20 hard ware and will require the 10mm wrench and 4 allen head Slide bracket between the factory hardtop and the rear window hinge and tighten until secure STEP 7 STEP 6 INSTALLATION MANUAL NEED HELP 855 680 9595 ...

Page 5: ...sely secure brackets to rack Install all the clamps onto each foot and using a 4 allen and the M6x25 hardware Leave loose for adjustment Place the provided rubber trim on each foot and set back into rain gutter Using the provided foam place them on feet clamps as shown STEP 10 STEP 9 STEP 8 INSTALLATION MANUAL NEED HELP 855 680 9595 ...

Page 7: ...ck Tighten all feet to the rack By doing this last it will allow feet and rack to move as needed while securing all feet Reinstall factory plastic hinge caps Double check fitment and that all hardware is secure STEP 14 INSTALLATION MANUAL NEED HELP 855 680 9595 ...