DV Signage VS-700, Application Note

Page: 8 / 14

© DV Signage 2012
Page 8 of 14
A complete NETCFG.INI example for Master and Slave units:
RJ-45 (Straight cable)
RJ-45 (Straight cable)
RJ-45 (Straight cable)
Network switch
NETCFG.INI (for Slave unit)
NETCFG.INI (for Master unit)
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
100M
LNK / ACT
Power Supply
Power Supply
RS-232
SPDIF
PS/2
DC 19V
USB USB
USB
HDMI
VGA
DVI
LAN
eSATA
Line in
Line out
Mic
Master unit (VS-700)
Power Supply
Power Supply
Connect to Monitor
RS-232
SPDIF
PS/2
DC 19V
USB USB
USB
HDMI
VGA
DVI
LAN
eSATA
Line in
Line out
Mic
Slave unit (VS-700)
Connect to Monitor
RS-232
SPDIF
PS/2
DC 19V
USB USB
USB
HDMI
VGA
DVI
LAN
eSATA
Line in
Line out
Mic
Slave unit (VS-700)
RJ-45 (Straight cable)
RJ-45 (Straight cable)
Power Supply
Connect to Monitor
RS-232
SPDIF
PS/2
DC 19V
USB USB
USB
HDMI
VGA
DVI
LAN
eSATA
Line in
Line out
Mic
Slave unit (VS-700)
Power Supply
Connect to Monitor
RS-232
SPDIF
PS/2
DC 19V
USB USB
USB
HDMI
VGA
DVI
LAN
eSATA
Line in
Line out
Mic
Slave unit (VS-700)
IP=10.1.0.71
NETMASK=255.255.255.0
GATEWAY=10.1.0.1
DNS1=0.0.0.0
DNS2=0.0.0.0
NETSYNC_SLAVE_MODE=1
NETSYNC_MASTER_ADDR=10.1.0.70
NETCFG.INI (for Slave unit)
IP_OVERWRITE=1
IP=10.1.0.72
NETMASK=255.255.255.0
GATEWAY=10.1.0.1
DNS1=0.0.0.0
DNS2=0.0.0.0
NETSYNC_SLAVE_MODE=1
NETSYNC_MASTER_ADDR=10.1.0.70
NETCFG.INI (for Slave unit)
IP_OVERWRITE=1
IP=10.1.0.73
NETMASK=255.255.255.0
GATEWAY=10.1.0.1
DNS1=0.0.0.0
DNS2=0.0.0.0
NETSYNC_SLAVE_MODE=1
NETSYNC_MASTER_ADDR=10.1.0.70
NETCFG.INI (for Slave unit)
IP_OVERWRITE=1
IP=10.1.0.74
NETMASK=255.255.255.0
GATEWAY=10.1.0.1
DNS1=0.0.0.0
DNS2=0.0.0.0
NETSYNC_SLAVE_MODE=1
NETSYNC_MASTER_ADDR=10.1.0.70
IP_OVERWRITE=1
IP=10.1.0.70
NETMASK=255.255.255.0
GATEWAY=10.1.0.1
DNS1=0.0.0.0
DNS2=0.0.0.0
NETSYNC_MASTER_MODE=1
NETSYNC_NUM_SLAVE=4
3.3 Disable the DVSYNC.INI
All VS-700 are shipped with “DVSYNC.INI” disable setting. If this DVSYNC.INI was
enabled, the video sync among master and slaves might not successful.
In case you find the slaves units cannot video sync with each others, please try to
disable the dvsync.ini through the following procedures.
1. Create a dummy DVSYNC.INI (i.e. a blank file) and place it in the “media” folder
on the USB flash drive.
2.
Update the dummy DVSYNC.INI on to the Master unit (VS-700) and all Slave unit
(VS-700) through
USB update . (see VS-700 user guide)