TRT30C Error Messages
M-T030CN-203-EN
15
4.8
Error Message “Emergency Stop”
This message is displayed when the
“Emergency stop” button on the front panel of the device is pressed.
Release the “Emergency stop” button by rotating it clockwise.
4.9
Error Message “Connections”
The Error message
“Connections” is displayed if the H or X cables are not connected properly to the
TRT30C. There are also green LED lights near the connectors which light up to indicate that these
connectors are connected properly.
Figure 4-9:
Error message
"Connections"
Figure 4-8:
Error message
"Emergency stop"
