7
RMO25W
Description
5 Description
5.1 Front Panel Components
Display
UP/DOWN
buttons to select
a menu and set test
parameters
LEFT/RIGHT
buttons to
navigate in the active
menu
ENTER
button to confirm the
defined test parameters,
Language, and Time and Date
STOP
button
Press to stop a test or stop the alarm buzzer.
Ω
button
Press to start a test.
Press to measuring the resistance current value.
Test parameters must be selected beforehand.
Green LED
• Lights continuously when RMO25W is turned on.
• Flashes when a test can be started.
• Flashes alternately with the red LED during a test.
Red LED
• Lights continuously in case of operational error.
• Flashes alternately with the green LED during a test.
STOP
button to stop a test, to
acknowledge the alarm buzzer
and return to the
Curr
menu
Red LED - Discharge
• Continualy lits until accumulated energy of the
measured object is reduced to harmless value, and
beeper buzzes.
Within this period it is prohibited to disconnect
measuring cables.
Diode or beeper could not be switched off by
STOP
button
.
