7
cONteNts
. Intended use
2. Technical data
3. Operating elements and connections
4. Opening the gong
5. Operation of radio gong
6. Melody selection
7. Selecting the Bell Mode
8. Adjusting the volume
9. Operation with sound module
0. Operation with USB-module
. Help
2. Cleaning
3. Warranty
4. Battery disposal
5. Illustrations
6. Additional Accessories
Dear customer,
Thank you for buying our high quality radio gong Vivo. Please read the following operating instructions through carefully before starting the gong.
1. INteNDeD use
The gong is only designed to be used with the appropriate batteries. Never connect it to other voltages.
2. techNIcAl DAtA
Dimensions:
80 x 30 x 46 mm
Operating temperature:
0°C - 40° C
Batteries:
3 x .5 V AA Mignon (not included)
Operating frequency of radio module:
433,92 MHz
Loudness:
max. 80dB/A
The gong conforms to the applicable European CE guidelines.
3. OperAtING eleMeNts AND cONNectIONs
Fig.
() Volume controller (VOL)
(2) Expansion slot for sound module or USB-module
(3) Battery compartment for .5 V battery (AA Mignon)
(4) Rotary switch to select the house code
(5) Sliding switch
C
for selecting the bell mode
4. OpeNING the GONG
To open the gong, release the cover from the base (Fig. 2), if necessary use suitable work tools (e.g. screwdriver) to push in the latches of the cover.
5. OperAtION OF rADIO GONG
Remove the cover of the gong. Insert the 3 x .5 V batteries into the gong and 2 x .5 V AAA micro batteries into the transmitter (not included) – take
care to ensure the polarity is correct.
Match the house code of the gong and the transmitter, i.e. both rotary switches should point to the same number.
This product would not perform normally under a strong electro static environment, it may need manual reset to normal operation.
GB
Receiver
Transmitter
