DUTCH IM2.1s Manual Download Page 7

Specifications:

Maximum gain passive: >+24dBu
Maximum gain active gain: +24dBu
Noise level passive: >118dB(a)
Noise level active: >116dB(a)
Stereo crosstalk: >110dB(a)
Stereo crosstalk mid/side: >80dB(a)
THD passive: 0.00042% (AD/DA limitations)
THD active: 0.00045%

Input voltage 100 to 240VAC 50/60HZ.
Power consumption minimum 5 watt
Power consumption maximum 30 watt
(Power consumption depends on the amount of inserts, input, output etc activated)
Unit size: standard 2u 19 inch, depth 25cm
Weight: approx 4kg

Specifications subject to change because always improving

Service and warranty:

We offer a standard 2 year limited warranty on all of our products.

In the event that you or a third party has (partly) altered or repaired anything, the
warranty will expire, and you will be held responsible for the damages caused by any
possible misfunctioning of the product. Warranty repairs are only made by us or by a
workshop we agree upon.

We are not responsible for any malfunction of or damage caused by parts that are not
produced by DuTCH.audio.

If you choose to ship back a faulty unit to us you must contact us before you do so. We
need the serial number (located on the back of the unit) to handle the repair and if
warranty is still valid.

The product should be returned in it's original package or packed in such a way that it
is not damaged during the shipment with extra support for the rack ears. We are not to
be held responsible for any damages during the shipment.

The customer always pays the shipping cost to us.

The customer is responsible for the product until it is delivered to us

If we find that the product is flawless the customer will be charged 200 euro to cover
our costs for examination and handling. The return costs will also be charged.

© DuTCH.audio 2021
Handmade in Holland on Solarpower

[email protected]

https://dutch.audio

Phone: +31 6 53998686

Summary of Contents for IM2.1s








Reviews: