MODE selection
Press the
SOURCE
button on the device, or the desired AUX – BT - HDMI ARC –
OPTICAL – COAXIAL button on the device’s remote control to select the desired
input mode.
The selected mode will be shown on the devices LED indicator :
• RED: standby mode.
• GREEN: AUX mode.
• GREEN FLASH: HDMI ARC mode.
• BLUE: BT mode.
• ORANGE: optical mode.
• ORANGE FLASH: coaxial mode.
Please note:
If the device source is in BT mode, and the BT connection is no longer active or out
of range, the LED indicator will flash blue.
If the device source is in HDMI ARC mode, and there is no active input signal, the
LED indicator will flash green.
Volume control
• Press the & - buttons on the device, or the
VOL+
&
VOL-
buttons
on the device’s remote control to adjust the volume.
• If you wish to turn the sound OFF, press the
MUTE
button on the remote control.
Press the
MUTE
button again or press the
VOL+
or
VOL-
button to resume
normal volume.
• While adjusting the volume, the LED indicator of the selected source mode will
flash quickly.
• When the volume level reaches maximum, and you try to increase it further, the
LED indicator for the selected source will flash once.
• When the volume level reaches its minimum, and you try to decrease it further, the
LED indicator of the selected source will flash once.
Select a pre-set sound effect
While playing, press the
NEWS, MOVIE, MUSIC
buttons on the device’s remote
control to select the desired pre-set equalisers.
Pre-set modes
• Movie (recommended for viewing movies).
• Music (recommended for listening music).
• NEWS (recommended for listening news / talk).
While selecting a pre-set sound effect, the LED indicator of the selected source
flashes quickly.
MODE selection (AUX / COAXCIAL / HDMI ARC / OPTICAL)
Make sure that the device is connected to the TV or audio device.
EN 11
4
6
B
C
C
E
D
D
6
6
6
6
6
6
7
