Connect an AUX cable between the TV’s AUX out port and the AUX port on the
device.
Then press the SOURCE button on the device until the LED indicator lights
up green or press the AUX button on the device’s remote control to select AUX
mode. The LED indicator will light up green.
A. Use a RCA to 3.5 mm audio cable (included) to connect the TV’s audio output port
to the AUX port on the device.
B. Use a 3.5 mm to 3.5 mm audio cable (included) to connect an external audio
device headphone socket to the AUX socket on the device.
Power connection
Before connecting the AC power cord, make sure you have completed all other
connections.
• Prior to use, check that the mains voltage is the same as the mains voltage stated
on the device.
• Plug the power plug into the mains supply.
• Plug the power plug of the power cord into the AC power socket of the device .
• The device is now in standby mode. The standby LED indicator will light up red.
Power ON/OFF – Standby
Press the power button on the device or press the power button on the
device’s remote control to switch it ON.
The LED indicator of the last used source mode will light up.
Press the power button on the device or press the power button on the
device’s remote control to switch the device to standby mode. The LED Indicator
will light up red.
Disconnect the power plug from the mains supply if you want to switch the device
OFF completely.
Please note:
If the device is not in use (no input), it will
automatically go into standby mode
after 15 minutes.
If the device’s external input signal is too low, it will
automatically go to standby
mode
after 15 minutes. Please increase the input signal of your externally connected
device.
EN 10
4
6
6
6
6
5
5
8
8
6
B
A
A
12
