Breeze mode
You can ventilate your room. In this mode the air is circulated, creating a ‘breeze feeling’,
but the room will not be cooled. In this mode the device will be in FAN – NORMAL – LOW
FAN Speed.
Press the
BREEZE
button on the device
7
or remote control
G
until the LED indicator
lights up on the control panel.
Note!
When the FAN speed or FAN airflow button is pressed, the device automatically
switches to FAN mode.
FAN speed
When the device is powered on, it automatically starts at medium speed, and after 3
seconds it automatically switches to low speed.
Repeatedly press the fan
Speed
button on the device
4
or remote control
B
until the
required FAN speed has been selected. There are 3 selectable FAN speeds; low, medium
& high speed.
While pressing, a beep sounds and the selected FAN speed is indicated on the control
panel.
FAN airflow
The device has 3 selectable mode functions: normal – natural - sleep.
Press the mode button on the device
6
or remote control
F
to select the desired mode.
•
Normal = regular fixed FAN speed
•
Natural wind = varying FAN speeds, giving a natural wind breeze with some high-speed
breezes.
•
Sleeping wind = varying gentle FAN speeds, giving a natural wind breeze between low
and medium speed.
While pressing, a beep sounds and the selected airflow LED indicator lights up on the
control panel.
Swing mode
To control the horizontal direction (up/down) of the airflow, adjust the louver in the air outlet
2
by hand.
To control the vertical (left/right) direction of the airflow, press the
Swing
button on the
device
3
or remote control
D
. While pressing, a beep sounds and the swing LED indicator
lights up on the control panel.
To stop the swing mode, press the
SWING
button on the device
3
or remote control
D
. While pressing a beep sounds and the swing LED indicator switches off on the control
panel.
Cooling mode
Press the
Cool
button on the device
5
or remote control
C
. While pressing, a beep
sounds and the LED indicator lights up on the control panel.
When using the device in cooling mode,
the water tank needs to be filled with cold
water!
To achieve a longer cooling function, fill the ice packs with water and freeze them before
use.
EN 07