(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(EN) USER MANUAL:
Wireless Doorbell (DO-CE-WDB1R1CAA-x)
TABLE OF CONTENT:
1) Package contents
2) Safety instructions
3) Installing and using the device
4) Cleaning and maintenance
5) Technical specifications
6) Storage and transportation
1) PACKAGE CONTENT
General information
• Read the instructions for use carefully and keep them
safe. If you give this device to other people, please also
pass on this manual.
• Only use this device in accordance with the
instructions in this user manual.
•
The device is not a toy. Keep it out of the reach of
children and pets.
•
This device is intended for domestic and private use
and its intended purpose only. The device is not
intended for commercial use. All other uses are deemed
to be improper and may result in damage to property or
even personal injury.
General Safety information and instructions
• Read the instructions for use carefully and keep them
safe. If you give this device to other people, please also
pass on this manual.
• Only use this device in accordance with instructions in
this user manual.
• Do not place the device under any mechanical stress.
• Please handle the device carefull
y. Jolts, impacts or
falls, even from a low height, can damage the device.
• Prior to use, check the device for visible external
damage. Never operate the device if it is damaged.
• Do not open the casing as this may result in electric
shock.
• Do not attempt to disassemble or repair the device or
modify it in any manner.
•
The chime’s LEDs cannot be replaced.
• Repairs must only be carried out by a qualified
technician. Never attempt to repair the device yourself.
Improper repairs can pose significant risks to the user
and will invalidate any warranty claims.
•
The guarantee will expire immediately if damage has
been caused by non-compliance with this user manual.
The manufacturer accepts no liability for damage
caused by non-compliance with the user manual,
negligent use or use which does not comply with the
conditions of this user manual.
•
This device is not a toy and should be kept away from
children and pets.
• Do not allow unsupervised children to clean or maintain this
device.
•
T
o avoid damage, never immerse the device in water or any
other liquid.
•
This device is intended for domestic or similar use and
should never be used for anything other than its intended
purpose.
• If you give the device to a third part
y, also supply the user
manual.
• Retain the device
’s user manual and packaging.
Batteries and heat
• Do not open the casing as this may result in electric shock.
• Do not place the device close to products that become hot.
• If the battery leaks, do not allow any battery fluid to come
into contact with the skin or eyes. If contact has been made,
wash the a
f
fected area with copious amounts of water and
seek medical advice.
• Keep batteries out of reach of children.
• Do not short circuit the contacts inside the battery
compartment or any batteries.
• Do not crush, puncture, dismantle the device, otherwise it
might damage the batteries.
• Do not dispose the device in a fire because the batteries
could explode.
• Do not expose the device and batteries to excessive heat
sources like fire.
• Do not dispose the device in your household waste, as it
contains batteries. Batteries can be disposed of by taking
them to your local recycling station. Contact your local
government offices for details.
3) INSTALLING AND USING THE DEVICE
Open the packaging carefully before taking out the device.
Make sure its complete and undamaged. If any components
are missing or damaged, contact the vendor and do not use
the product. Retain the packaging or recycle it in accordance
with local regulations.
• Remove all packaging from the device.
• Clean the device with a damp cloth. Please refer to the
'cleaning and maintenance’ section.
Parts and features
CHIME
(1) Melody selection button
(2) Volume button
(3) Mode selection
(4) LED light ON/OFF
Inserting batteries
Ringer
• Detach the mounting plate from the ringe
r.
• Open the round battery cover (10) of the device with a coin.
•
T
urn the battery cover counter clockwise to open it.
• Insert 1 x 3Vdc CR2032 battery (included), observing the
polarities in the battery compartment.
• Put the battery cover back on the battery compartment.
To
secure the battery cover,
turn it clockwise.
Note:
If the battery needs to be replaced after mounting the
device, first detach the ringer from the mounting plate, then
follow the steps as described above.
Chime
• Open the battery cover (9) by pulling the lip of the battery
cover.
• Insert 2x 1.5Vdc
AA batteries (not included), observing the
polarities in the battery compartment.
• Replace the cove
r
, closing the battery compartment (9).
Operating Instructions
pairing the ringer and chime
• Press and hold the melody selection button (1) on the chime
for 3 seconds until you hear two short beeps.
• Press the button of the ringer (5) within 30 seconds.
T
wo
short beeps will sound, indicating the ringer is paired with the
chime.
• Press the ringer button (5) to check correct operation.
Note! In case of a second chime; follow the pairing
procedure as described above.
Unpairing the ringer and chime
• Press and hold the melody selection button (1) on the chime
for 10 seconds.
The chime will sound two short beeps
indicating the ringer and chime are unpaired.
Melody selection
• Press the melody selection button (1) on the chime to select
one of the 18 available melodies.
• Each press will select another melod
y.
Volume setting
• Press the volume button (2) for 1 second to select the
desired volume level. There are 4 different volume levels.
• Select the desired volume level of the chime by pressing the
volume button (2). Each press will increase the volume level
(1=>2=>3=>4 =>1)
Mode selection (melody, LED flash, melody & LED flash)
• Switch the mode selection button (3) to select the desired
mode
o Melody – upper position switch
o LED flash – middle position switch
o Melody & LED flash – bottom position switch
Installation ringer
Mounting with adhesive tape
The ringer can be mounted by using the included adhesive
tape on the rear surface of the mounting plate.
Adhesive tape can only be used on a dry and smooth surface,
which is free of dirt and grease.
In order to prepare the surface for putting the adhesive tape
on the mounting plate, wipe the surface with a cloth soaked in
degreaser
, then wipe it dry before placing the mounting plate
with the adhesive tape.
Description
Chime
Ringer
CR2032 battery
Mounting screws & plugs
Adhesive tape for ringer
User manual
Quantity
1
1
1
3
1
1
Mounting with screws & plugs
If you intend to install this device yourself, you must check for
installations such as electrical wiring and plumbing that may
be hidden inside the wall.
Additional tools (not included) are
required for installation.
Mark the drill holes at the marked positions (holes) of the
mounting plate.
Drill the holes and push the mounting plugs into the drilled
holes.
Then use the screws to assemble the mounting plate. Do not
over-tighten screws.
Attach the ringer to the mounting plate.
I
nstallation chime
The portable chime can be placed in any desired location.
It is possible to mount the chime. Check correct operation
before drilling any hole.
To mount the chime, drill a hole at the desired position and
push the mounting plug into the drilled hole. Then use the
screw to slide the chime over the mounted chime.
4) CLEANNG AND MAINTANANCE
Proper and regular cleaning will ensure safe operation and
extend the lifespan of the device. Use a damp cloth to remove
dirt from the device.
Attention!
• Do not clean the device with strong chemicals - or
alkali-based, abrasive or disinfecting agents - because they
could damage the surface of the product.
• Do not immerse the device into water or any other liquids.
5) TECHNICAL SPECIFICATIONS
• Frequency: 433,92 Mhz
• Input ringer: 3Vdc CR2032 battery
• Input chime: 3Vdc 2x
AA battery
• Ringer: IP44
• Dimensions ringer: 3.9 x 9.4 x 2.2 cm (
L x H x D)
• Dimensions chime : 7 x 12.4 x 2.3 cm (
L x H x D)
• Net weight Ringer: 43 gram
• Net weight Chime: 89 gram
All contents and specifications mentioned in this manual are
subject to change without prior notice.
RINGER
(5) Ringer button
(6) LED light
(7) Name plate
(8) mounting plate
•
WARNING!
Do not leave packaging material lying
around carelessly. This may become dangerous
playing material for children. Risk of suffocation!
2) SAFETY INSTRUCTIONS
The following basic precautions must always
be taken before using the “Wireless Doorbell”
hereinafter referred to as ‘device’:
(NL) GEBRUIKERSHANDLEIDING:
Draadloze deurbel (DO-CE-WDB1R1CAA-x)
INHOUDSOPGAVE:
1) Inhoud verpakking
2) Veiligheidsinstructies
3) Installatie en gebruik van het apparaat
4) Reiniging en onderhoud
5) Technische specificaties
6) Opslag en transport
Manual DoC 285 x 210 mm Dutch Originals Electronics – Wireless Doorbell (DO-CE-WDB1R1CAA-x)
V
ersion: 200207
INSTRUCTIONS FOR PROTECTING THE ENVIRONMENT
(WEEE,
the waste electrical and electronic equipment directive)
Your product has been manufactured using high quality materials and
components which can be recycled and used again. At the end of its
life span, this product cannot be disposed of in normal domestic
waste, but must be taken to a special collection point for recycling
electrical and electronic equipment. This is indicated in the user
manual and in the packaging by the waste container marked with a
cross symbol. Used raw materials are suitable for recycling.
By recycling used appliances or raw materials, you are playing an important role
in protecting our environment. You can ask your local council about the location
of your nearest collection point.
