
Powering the device ON/OFF:
• To power ON the device, press the ‘power’ button
G
for ± 3 seconds.
Once powered ON, you will hear a ‘tone’, the display
9
will light up and the time is
shown (initial setting 00:00).
• Power OFF the device: press the ‘power’ button
G
for ± 3 seconds, you will hear a
‘tone’ & the display
9
will switch OFF.
• When the device is powered OFF, the time can be shown on the display
9
for ± 5
seconds by pressing one of the buttons
1
to
8
.
Setting the time:
When powering ON the device, it is in time mode.
By pressing the ‘clock’ button
1
you can switch between setting the hour and
minutes.
• Use the ‘-‘
3
or ‘+’
5
buttons to set the time.
• Press the ‘clock’ button
1
until the hours on the display
9
start flashing, and use ‘-‘
3
or ‘+‘
5
to set the hour. Confirm the set hour by pressing the ‘clock’ button
1
.
• Press the ‘clock’ button
2
two times until the minutes on the display
9
start
flashing, and use ‘-‘
3
or ‘+‘
5
to set the minutes. Confirm the set minutes by
pressing the ‘clock’ button
1
.
Note!
If there is no activity for ± 3 sec, the time will stop flashing.
Modes
You can select the desired mode. Each mode is described in detail below:
Power ON: time mode => natural sounds => BT => FM =>
If a USB flash drive, Micro SD card and AUX-in are connected, you can select the
desired mode:
Power ON: => time mode => natural sounds => BT => FM => AUX-in => USB Flash
=> Micro SD =>
Note!
When a USB flash drive and Micro SD card are connected, these can be
selected, but are indicated with the ‘TF’ icon on the display
9
.
Natural sounds:
When the device is powered ON, press the ‘mode’ button
G
to listen to natural
sounds. On the display
9
the ‘NS’ icon will light up. Press the ‘next’
H
or ‘previous’
button
J
to select one of the 7 sounds.
Natural sounds: singing birds 1 => jungle 2 => valley 3 => wind 4 => water creek 5
=> rain 6 => beep 7
Wireless BT
When the device is powered ON, press the ‘mode’ button
G
two times to enable the
BT mode.
This allows you to connect your smartphone or tablet in order to stream music or
answer phone calls handsfree. You will hear a ‘tone’ and ‘BT’ will flash quickly on the
EN 05