10
Customer Service Helpline 1.800.568.3949 dustlesstools.com
4. Place the filter-cleaning weight on the filter
cover support, then place the HEPA filter
cover over the HEPA filter cover support
and HEPA filter. Place the 10” hose clamp
over the HEPA filter cover so it rests on the
metal ring of the filter. Tighten the clamp
with a screw drive.
RECOMMENDED REPLACEMENT
INTERVALS
Every 6 months: Replace HEPA Filters
As needed: Replace WunderBag
Note: In order to prevent unnecessary
downtime, it is recommended that you keep
the following items in stock:
• 1X HEPA Filters
• 2X WunderBags
• Motor Brushes
MAINTENANCE
cont
FILTER INSTALLATION (HEPA
WET+DRY) cont.
• Adjustments, servicing, and inspection
work and inspection intervals specified in
these Operating Instructions, as well as any
information on the replacement of parts and
systems of the vacuum must be undertaken
and complied with.
• These activities can only be undertaken by
qualified personnel.
• Make sure that electrical components used
for replacement comply with the original
parts and are correctly adjusted if necessary.
• Before performing any maintenance, place
the vacuum in the safety off position which
is the position of the vacuum when it cannot
generate any hazard. To do this, switch off
the dust collector, pull out plug, and secure
the vacuum against unintended start up.
• Inspection intervals and times for recurring
checks specified in these Operating
Instructions must be complied with.
SERVICE
