3
IN THE BOX
Switch
HEPA Floor Tool
Lid
Cord
Floor Tool
Filter Bag
Harness
Crevice Tool
Hose
Reusable Cloth Bag
Agitator Rod
SETUP
1. Remove entire contents of box.
2. Remove lid, fi lter bag, and reusable cloth
bag. Check that the HEPA fi lter is still in
place.
3. Install reusable cloth bag and fi lter bag.
NOTE: Never use a fi lter bag without the
reusable cloth bag.
4. Place the lid on top of the canister and
secure in place with the 2 lid clamps. Be
sure the agitator rod goes through the
small hole in the rubber gasket.
5. Attach hose to HEPA Pack
TM
.
6. Install switch box on the harness. Secure
with the Velcro straps.
HEPA Filter
2 Piece S Wand
Manual
1. Lift the vacuum by one shoulder strap and
slide your free arm into the other strap.
2. Adjust shoulder straps to allow the waist
belt to be buckled around your waist.
3. Fasten the waist belt and chest belt
snugly and make sure the weight is resting
comfortably on your hips.
USAGE
