Rotate the knobs
on both sides
Air quality
sensor
Tips
1
4
7
8
5
6
2
1
1
2
2
3
Clean or replace the filter
Turn off the air cleaner
and unplug it
Open the filter covers on the
left and right side:
Pull out the filter cover from
the upper part on both sides
Take out the primary filters
and Molecular filters (remove
the plastic bags of new filters)
Rotate the Fixing knob
Lift the Main filters
outward and take it out
along the chutes on both
sides
Clean the filters with a vacuum
cleaner or replace them
Put the filters back in
order, and cover the
filter covers.
Insert the plug again, press ( ) button
to start up the air cleaner. Then press
the cleaning or replacement indicator
for about 5 seconds, the indicator will
stop flashing and go out, and the timer
will start over again. Now the timer has
been reset, and waiting for the next
alarm time.
In order to better use the air cleaner,
do not block the openings of the
smell sensor, or the dust sensor on
the strip behind the machine. Often
clean them and keep them clean.
Press for 5 seconds
PRE FILTER
MOLECULAR
MAIN FILTER
6
Summary of Contents for Dustie DAC700
