Dustie Dustie DAC700, Operating Manual

Page: 6 / 16

Main filter indicator/reset button
If the air cleaner has been used about 12 months（*see remark）, the main filter indicator (red) will flash to
remind you to replace the filter. After replacing, press the replacement indicator for about 5 seconds, the
indicator will stop flashing and go out, and the timer will start over. Now the timer has been reset, and waiting
for the next alarm time. Tips: based on different environments of use, it is recommended to replace the filter
every 6~12 months. (If the air cleaner is often used, it is recommended to clean the main filter with a vacuum
cleaner after 1 month used, to ensure the ideal filtering performance)
Main Molecular Primary filter:
DAC700 is equipped with two sets of main filters,molecular filters (for removal of formaldehyde and odor),
and primary filters (for removal of dust haze, allergens, bacteria and odors in the air), to maintain a high
quality of air environment by continuous use.
It is recommended to clean the main filter with a vacuum cleaner to ensure the ideal performance)
Cleaning and maintenance of the machine
After the filter cover is removed,
use the vacuum clean small brush
or a wet cloth to gently wipe the
filter cover, wait it to dry, and then
fit it back into the machine. Gently wipe the air cleaner body
with a wet cloth. Shall not allow
water to flow into the air outlet or
inlet, otherwise, the motor or
switch will be damaged.
Maintenance
5
Do not immerse the product into water or wipe it with
chemical cleansers. Keep water from entering the product.
Caution
The electrical equipment should be turned off power before the relevant operations
such as cleaning or maintenance of the electric appliance.