DC Tromb 400a/c/L - 15
Part No 9480-E
EN
G
L
IS
H
Service
With cleaning and maintenance on the machine,
the power cable should be disconnected from the
supply. Fluids should not come into contact with the
motor. When cleaning with fl uids the motor should
be covered to anoid contact.
The fi ne fi lter should be changed at least once per
year. Use only original spare parts. The microfi lter/
HEPA fi lter, should be changed every 300 running
hours. Use breathing protection during a fi lter chan-
ge. The operation should be performed in a closed
area. Used fi lters should be sealed in a plastic sack
and disposed of properly.
Check regularly that the electrical cable is not da-
maged.
The DC Tromb 400 should be performance tested
at least once per year because it may be used with
hazardous materials. Worn parts must be replaced.
Never compromise the function of the DC Tromb 400,
use only original spare parts.
For vacuum motor the typical average life of the
original brushes is 600 - 700 hours. They can then
be exchanged or complete motor/fan replaced. For
2nd brush set life is ca. 400 hours and for 3rd brush
set ca. 300 hours. After that the commutator is worn
out and the motor needs to be replaced.
Description
Part
no
Coupling socket
2107
Coupling socket
2129
Hose std Ø=50 per mtr
2401
HEPA fi lter
44016
Fine fi lter, polyester,
with integrated fi lter cover
44017
Plastic sack, 50 pieces
4314
Description
Part
no
Accessories
Intellibag, 10 pieces/roll
43619
Fold bag longopac
432177
Other accessories — see Dustcontrol catalogue.
The warranty period for this machine is two years
and covers manufacturers faults. The warranty is
valid under the condition that the machine is used
under normal conditions on the task for which it was
designed and is maintained properly. Normal wear
is not covered by this warranty.
Warranty
Service performed by other than Dustcontrol or its
authorized agent voids automatically the warranty.
No other warranty express or implied is applicable.
6HUYLFH
