DC 1500 - 8
Art nr 9018
Safety Considerations
Read all instructions before attempting to operate
this machine and save these instructions.
Warning!
When using electric machines, basic
safety precuations should always be followed to
reduce the risk of fi re, electric shock and personal
injury, including the following:
1.
Work area environment
Don´t expose the machine for rain. Don´t use
it in damp or wet locations or in presence of
fl ammable liquids or gases.
2.
Overload
Never let the machine operate fully throttled.
Always follow the regulations pertinent to the
material you are working with ie asbestos.
Don´t use the machine for purposes that it isn´t
intended
for.
3.
Don´t abuse cord
Never pull the machine by cord. Keep cord
from heat and sharp edges. Check the electric
cable regularly if damage.
4.
Important measure
With cleaning and maintenance on the mach-
ine, the power cable should be disconnected
from the supply.
5.
Maintain the machine with care
Keep machine clean and check that the hose
is entired and that all gaskets are tight. Follow
instructions. Keep handles dry and free from
oil and grease.
6.
Checking of damage
Before futher use of the machine it should
be carefully checked that the machine is un-
damaged. If there are any damaged parts these
should be repaired by of a Dustcontrol authori-
zed service center.
7.
Warning
Use only accessories and replacable parts
which are available in Dustcontrol catalogue.
When using faulty parts or pirate parts
(especially
fi lter) the machine could leak out
unhealthy dust which can cause personal
injuries.
TECHNICAL DATA
HxWxL 940x375x1250
mm
Weight 48
kg
Inlet
φ
250 mm
Flow, max
1500 m
3
/h
without microfi lter
2000 m
3
/h
Power consumption
Max. 800 W, 2.5 A
230
V
Degree of separation,
microfi lter EN 1822-1
HEPA 13 (DOP 99.97%)
Soundlevel
< 71 dB(A)
