background image

5

• 

Make sure the power sockets used for the battery charger are connected to a suitable ground system 
and protected by differential thermal solenoid switches.

• 

Make sure the electrical characteristics of the machine (voltage, frequency, absorbed power) given on 
the rating plate are the same as those of the mains electricity supply.

• 

It is indispensable to respect the battery manufacturer’s instructions and current legislation. The 
batteries should always be kept clean and dry to avoid surface leakage current. Protect the batteries 
from impurities such as metal dust.

• 

Never rest tools on the batteries as this could cause short circuit and explosion.

• 

When using battery acid, always follow the relative safety instructions scrupulously.

• 

Battery charger: check the power cable regularly for damage. If the power cable is damaged, the 
charger must not be used.

• 

In the presence of particularly strong magnetic fields, assess the possible effect on the control 
electronics.

• 

Never wash the machine with water jets.

• 

The fluids collected contain solution, disinfectant, water and organic and inorganic material. They 
must be disposed off in accordance with current legislation.

• 

In the case of malfunction and/or faulty operation, turn the machine off immediately (disconnecting 
it from the mains power supply or batteries) and do not tamper. Contact a service center authorized 
by the Manufacturer.

• 

All maintenance operations must be performed in an adequately lit place and only after 
disconnecting the machine from the power supply.

• 

All work on the electrical system and all maintenance and repair operations other than those explicitly 
described in this manual must be performed by specialised personnel expert in the sector only.

• 

Only original accessories and spare parts supplied by the Manufacturer may be used in order 
to guarantee safe problem-free operation of the machine. Never use parts removed from other 
machines or from other kits.

    Disposal  Special waste. Do not dispose of with ordinary waste.

• 

If you decide to stop using the machine, you are recommended to remove the batteries and dispose 
of them at an authorized collection center.

• 

You should also make sure that all parts of the appliance which could represent a hazard, particularly 
to children, are made safe.

• 

Properly clean solutions and recovery tank before disposal.

5. Handling And Installation

5.1. Lifting and transporting the packaged machine

Important

During all lifting operations, make sure the packaged machine is firmly anchored to avoid it 

tipping up or being accidentally dropped.

Always load/unload lorries in adequately lit areas.

The machine, packaged on a wooden pallet by the Manufacturer, must be loaded using suitable equipment 
(see EC Directive 2006/42 and subsequent amendments and/or additions) onto the transporting vehicle. At 
destination, it must be unloaded using similar means.

Summary of Contents for Hurricane Scooter Ride-On


























Reviews: