19
1. remove the squeegee from its mount by completely
2. unscrewing the two knobs
3. remove the suction hose sleeve from the squeegee;
4. release the catch (ref. 3 or 6);
5. remove the two blade retainers (ref. 2 or 7) by first pushing them towards the body of the squeegee
(ref. 1) then extracting them;
6. remove the blade (ref. 4 or 5);
7. reuse the same blade by reversing the edge in contact with the floor until all four edges are worn out,
or replace with a new blade, fitting it onto the screws on the body of the squeegee (ref. 1);
8. reposition the two blade retainers (ref. 2 or 7) by centering the widest part of the slots over the fixing
screws on the squeegee body (ref. 1), then pushing the blade retainers inwards;
9. refasten the catch (ref. 3 or 6).
Replace the squeegee in its support.
9.4.2 Fuses: replacement
The fuses protecting the brush and suction motors are located in the fuse holder (ref. 1) attached to the recovery
tank above the machine battery compartment.
To replace the fuses:
1. make sure the recovery tank is empty and empty if necessary;
2. raise the recovery tank;
3. raise the fuse holder cover and remove the fuse by unscrewing the fixing screws;
4. fit a new fuse and close the fuse holder cover;
5. lower the recovery tank.
Fuse table: for the complete fuse table, see the spare parts catalogue.
Summary of Contents for Hurricane Scooter Ride-On
Page 2: ......
